久久乐一本色道久久综合一,欧美日韩国产精品自在自线,中文国产精品久久久,欧美日韩亚洲精品

PA66 FR70M30V0 NC010美國杜邦Zytel® 30%礦物增強(qiáng)阻燃聚酰胺66尼龍塑料（18024445500）

Zytel® FR70M30V0 NC010 is a 30% mineral reinforced, flame retardant polyamide 66 resin for injection moulding.
General information Value Unit Test Standard
Resin Identification PA66-MD30FR(17) - -
Part Marking Code >PA66-MD30FR(17) - ISO 11469
　 < 　 　
Rheological properties dry / cond Unit Test Standard
Moulding shrinkage, parallel 1.0 / * % ISO 294-4, 2577
Moulding shrinkage, normal 1.0 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 6500 / 3500 MPa ISO 527-1/-2
Stress at break 73 / 50 MPa ISO 527-1/-2
Strain at break 2 / 6 % ISO 527-1/-2
Charpy impact strength 　 　 ISO 179/1eU
23°C 20 / 30 kJ/m² 　
-30°C 20 / 19 kJ/m² 　
Charpy notched impact strength 　 　 ISO 179/1eA
23°C 2.5 / 3 kJ/m² 　
-30°C 2 / 2 kJ/m² 　
Izod notched impact strength 　 　 ISO 180/1A
23°C 2/2.5 kJ/m² 　
-30°C 2/1.9 kJ/m² 　
Thermal properties dry/cond Unit Test Standard
Melting temperature, 10°C/min 263/* °C ISO 11357-1/-3
Temp. of deflection under load 　 　 ISO 75-1/-2
1.8 MPa 145 / * °C 　
0.45 MPa 238 / * °C 　
Vicat softening temperature, 50°C/h, 50N 235 / * °C ISO 306
Coeff. of linear therm. expansion, parallel 64 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 81 / * E-6/K ISO 11359-1/-2
Thermal conductivity of melt 0.23 W/(m K) -
Spec. heat capacity of melt 1700 J/(kg K) -
RTI, electrical 　 　 UL 746B
0.75 mm 105 / * °C 　
1.5mm 120 / * °C 　
3mm 120 °C 　
RTI, impact 　 　 UL 746B
0.75 mm 95 °C 　
1.5mm 105 / * °C 　
3mm 115 °C 　
RTI, strength 　 　 UL 746B
0.75 mm 105 °C 　
1.5mm 115 / * °C 　
3mm 115 °C 　
Flammability dry / cond Unit Test Standard
Burning Behav. at 1.5mm nom. thickn. V-0 / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h V-2 / * class IEC 60695-11-10
Thickness tested 0.75 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. 5V at thickness h 5VA / * class IEC 60695-11-20
Thickness tested 1.5 / * mm IEC 60695-11-20
UL recognition UL / * - -
Glow Wire Flammability Index 　 　 IEC 60695-2-1/2
0.75mm 960/- °C 　
1mm 960/- °C 　
1.5mm 960/- °C 　
3mm 960/- °C 　
Glow Wire Ignition Temperature 　 　 IEC 60695-2-1/3
0.75mm 800/- °C 　
1mm 800/- °C 　
1.5mm 800/- °C 　
3mm 800/- °C 　
Electrical properties dry/cond Unit Test Standard
Relative permittivity 　 　 IEC 60250
100Hz 4.1 / 9.1 - 　
1MHz 3.7 / 4.2 - 　
Dissipation factor 　 　 IEC 60250
100Hz 140 / 410 E-4 　
1MHz 140 / 500 E-4 　
Volume resistivity >1E13 / 1E9 Ohm*m IEC 60093
Surface resistivity * / >1E15 Ohm IEC 60093
Electric strength 40 / 33 kV/mm IEC 60243-1
Comparative tracking index 325 / - - IEC 60112
Surface Resistivity 1E15 / - Ohm ASTM D 257
Volume Resistivity 1E14 / - Ohm*m ASTM D 257
Other properties dry / cond Unit Test Standard
Humidity absorption, 2mm 1.3 / * % Sim. to ISO 62
Water absorption, 2mm 4 / * % Sim. to ISO 62
Density 1620 / - kg/m³ ISO 1183
Density of melt 1400 kg/m³ -