久久乐一本色道久久综合一,欧美日韩国产精品自在自线,中文国产精品久久久,欧美日韩亚洲精品

PA6 BKV 35 000000德國朗盛Durethan 35%玻纖增強(qiáng)尼龍6塑料（18024445500）

PA 6, 35 % glass fibers, injection molding



ISO Shortname: ISO 1874-PA 6, GR, 14-110, GF35

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Molding shrinkage, parallel 60x60x2; 280 °C / MT 80 °C; 600 bar % ISO 294-4 0.23　
C Molding shrinkage, transverse 60x60x2; 280 °C / MT 80 °C; 600 bar % ISO 294-4 0.7　
Post- shrinkage, parallel 60x60x2; 120 °C; 4 h % ISO 294-4 0.07　
Post- shrinkage, transverse 60x60x2; 120 °C; 4 h % ISO 294-4 0.14　

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 10700 6800
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 180 110
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 3.0 5.0
C Tensile creep modulus 1 h MPa ISO 899-1　6000
C Tensile creep modulus 1000 h MPa ISO 899-1　4900
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU 80 90
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU 70 70
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA 12 20
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA <10 10
Izod impact strength 23 °C kJ/m² ISO 180-1U 75 85
Izod impact strength -30 °C kJ/m² ISO 180-1U 70 65
Izod notched impact strength 23 °C kJ/m² ISO 180-1A 15 20
Izod notched impact strength -30 °C kJ/m² ISO 180-1A <10 10
Flexural modulus 2 mm/min MPa ISO 178-A 10700 5900
Flexural strength 2 mm/min MPa ISO 178-A 290 180
Flexural strain at flexural strength 2 mm/min % ISO 178-A 4.0 5.0
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A 280 160
C Puncture maximum force 23 °C N ISO 6603-2 1060　
C Puncture maximum force -30 °C N ISO 6603-2 945　
C Puncture energy 23 °C J ISO 6603-2 3.9　
C Puncture energy -30 °C J ISO 6603-2 3.3　
Ball indentation hardness　N/mm² ISO 2039-1 230 120